SKF/NSK/Koyo/Timken 30224 Tapered Roller Bearing for Gas Turbine

• Contact Angle: 0
• Aligning: Non-Aligning Bearing
• Separated: Separated
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 30224
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Seals Type: Open
• Lubrication: Grease or Oil
• Samples: Available
• Cage: Steel
• Feature: Low Vibration
• Design: Standard
• Quality: ABEC-1, Z1V1
• Stock: Rich Stock
• Precision: P6 P5 P4 P2
• Clearance: C2 C0 C3 C4 C5
• Vibration: Z4, Z3, Z2, Z1
• Limiting Speed: 5600-18000r/Min
• Serive: OEM
• Installation Error: Allowable
• Grease Technology: High
• Transport Package: Air/Sea; Box+Carton+Pallet
• Specification: all size
• Trademark: OEM
• Origin: China
• HS Code: 8482200000
• Production Capacity: 100000/Mouth
• Package Size: 40.00cm * 35.00cm * 20.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

Tapered roller bearing refers to a radial thrust type rolling bearing with a tapered roller as the rolling element. There are two types: small cone angle and large cone angle. The small cone angle mainly bears combined radial and axial loads, mainly radial loads. It is often used in pairs and installed in reverse. The inner and outer races can be installed separately, and the radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the combined axial and radial loads mainly composed of axial loads, and is generally not used separately to bear pure axial loads. It can be used as a pair configuration (with the same end installed relative to each other) to bear pure radial loads.
 

Classification of rolling columns for tapered rollers:

(1)single-row tapered roller bearing. The cone angle of the outer ring raceway is between 10 ° and 19 °; Bearings with large cone angles, with a trailing code B and a cone angle between 25 ° and 29 °
(2)double-row tapered roller bearing. The small end faces of the two inner rings (or outer rings) are similar, with a spacer ring in the middle. The clearance is adjusted by the thickness of the spacer ring
(3)four-row tapered roller bearing. The performance of this type of bearing is basically the same as that of double row tapered roller bearings, but it bears a greater radial load and has a slightly lower limit speed compared to double row tapered roller bearings. It is mainly used in heavy-duty machinery.

Dimensions of tapered roller bearings:
 

(1)Single row tapered roller bearings:
   Inner diameter size range: 20mm~1270mm
   Outer diameter size range: 40mm~1465mm
   Width size range: 15mm~240mm
(2)Double row tapered roller bearings:
   Inner diameter size range: 38mm~1560mm
   Outer diameter size range: 70mm~1800mm
   Width size range: 50mm~460mm
(3)Four row tapered roller bearings:
   Inner diameter size range: 130mm~1600mm
   Outer diameter size range: 200mm~2000mm
   Width size range: 150mm~1150mm
 

Installation of tapered roller bearings:

1, The fit between the inner ring of the four row tapered roller bearing and the roller neck is generally with clearance. When installing, first install the bearing into the bearing box, and then install the bearing box into the journal.

2, The outer ring of the four row tapered roller bearing and the bearing housing hole also use a dynamic fit. First, install the outer ring A into the bearing housing. When leaving the factory, the outer ring, inner ring, and inner and outer spacer rings are printed with the symbol 'HotTag'. During installation, they must be installed in the bearing box in the order of the character symbols. It cannot be interchanged arbitrarily to prevent changes in bearing clearance.

3, After all the parts are installed in the bearing box, tighten the inner ring and inner spacer ring, and the outer ring and outer spacer ring axially.

4, Measure the gap width between the outer ring end face and the bearing box cover plate to determine the thickness of the corresponding sealing gasket.

Design Properties of Cylindrical Roller:

*Raw material: Manufactured with reliable  super-clean chrome steel, these long-lasting bearings are designed to meet severe-duty application requirements.
 

*Tight tolerances: Uniform internal geometry, including angle of contact for cones and rollers, creates a precise match between cup and cone - extending bearing life.
 

*Precision profiles: Internal raceway profiles reduce stress on bearing components by distributing the loads evenly across contact surfaces - increasing load-carrying capacity.
 

*Super finishing surface: Advanced automatic finishing processes generate smoother surface finishes on races and rollers to reduce friction - helping increase fuel efficiency.
 

*Flexibility: Engineered for severe-duty applications in any configuration - dual and wide singles - LM-Series wheel bearings maintain consistency and simplicity within fleets.
*Compatibility: LM-Series wheel bearings fit popular axle and hub designs, allowing retrofit into existing equipment.

 

Product Parameters

Tapered Roller Bearing
30000 Series Tapered Roller Bearing
Bearing No.	Dimensions(mm)			Weight(kg)
	d	D	T
30202	15	35	11	0.053
30203	17	40	13.25	0.079
30204	20	47	15.25	0.126
30205	25	52	16.25	0.154
30206	30	62	17.25	0.231
30207	35	72	18.25	0.331
30208	40	80	19.75	0.422
30209	45	85	20.75	0.474
30210	50	90	21.75	0.529
30211	55	100	22.75	0.713
30212	60	110	23.75	0.904
30213	65	120	24.75	1.13
30214	70	125	26.25	1.26
30215	75	130	27.25	1.36
30216	80	140	28.5	1.65
30217	85	150	31	2.1
30218	90	160	33	2.52
30219	95	170	35	3.17

31000 Series Tapered Roller Bearing
Bearing No.	Dimensions(mm)			Weight
	d	D	B
31303	17	47	15	0.13
31304	20	52	16.5	0.17
31305	25	62	18.5	0.26
31306	30	72	21	0.38
31307	35	80	23	0.517
31308	40	90	25.5	0.66
31309	45	100	27.5	0.974
31310	50	110	29.5	1.23
31311	55	120	32	1.5
31312	60	130	34	1.92
31313	65	140	36.5	2.29
31314	70	150	38.5	2.87
31315	75	160	40	3.43
31316	80	170	42.5	4.09
31317	85	180	45	4.91
32000 Series Tapered Roller Bearing
Bearing No.	Dimensions(mm)			Weight
	d	D	B
32203	17	40	17.25	0.102
32204	20	47	19.25	0.16
32205	25	52	19.25	0.187
32206	30	62	21.25	0.287
32207	35	72	24.25	0.445
32208	40	80	24.75	0.532
32209	45	85	24.75	0.573

33000 Series Tapered Roller Bearing
Bearing No.	Dimensions(mm)			Weight
	d	D	B
33005	25	47	17	0.129
33006	30	55	20	0.201
33007	35	62	21	0.25
33008	40	68	22	0.306
33009	45	75	24	0.398
33010	50	80	24	0.433
33011	55	90	27	0.651
33012	60	95	27	0.691
33013	65	100	27	0.732
33014	70	110	31	1.07
33015	75	115	31	1.12
33016	80	125	36	1.63
33017	85	130	36	1.75
33018	90	140	39	2.157
33019	95	145	39	2.3
33020	100	150	39	2.4

More models

 

We can supply Complete series Mounted Ball Bearing Unit as follows:

1. Pillow block bearing                        
2. 4-Bolt Flange unit                           
3. 2-Bolt Flange unit

4. Ajustable 2-Bolt Flange unit           
5. 3-Bolt Flange unit                               
6. 4-Bolt Flange Cartridge unit

7. Take-up units                                 
8. Section steel frame Take-up units      
9. Channel steel frame take-up units

10. steel plate frame take-up units     
11. Cartridge units                                   
12. Hanger Units