Product Description
Deep Groove Ball Bearing is the most common type of rolling bearing.
The basic Deep Groove Ball Bearing consists of an outer ring, an inner ring, a group of steel balls and a group of retainers. There are two types of Deep Groove Ball Bearing: single row and double row. The deep groove ball structure is also divided into sealed and open structures. The open type refers to the bearing without sealing structure. The sealed deep groove ball is divided into dust seal and oil seal. The dustproof sealing cover material is made of steel plate stamping, which only serves to prevent dust from entering the bearing raceway. The oil proof type is a contact type oil seal, which can effectively prevent the leakage of lubricating grease inside the bearing.
The type code of single row Deep Groove Ball Bearing is 6, and the code of double row Deep Groove Ball Bearing is 4. Its simple structure and convenient use make it the most widely produced and widely used type of bearing.
Deep Groove Ball Bearing seal
1.The suffix 2Z of Deep Groove Ball Bearing indicates bilateral clearance seal, which is applicable to high speed.
2.The suffix 2RSR of the bearing indicates a double-sided lip seal, made of nitrile phenolic resin rubber material NBR, suitable for medium speeds.
3.After negotiation, we can provide bearings with non-contact BRS seals on both sides (suffix 2BRS).
This bearing has good friction performance,equivalent to Z-type sealed bearings. If the inner ring remains stationary while the outer ring rotates, the grease leakage will be smaller than the seal with a Z-shaped dust cover.
Cage of Deep Groove Ball Bearing
1.The model of Deep Groove Ball Bearing without cage suffix adopts pressed steel cage.
2.The bearing suffix for the steel ball guided brass solid cage is M.
3.The suffix Y indicates that the bearing cage is stamped brass.
4.The cage of double row Deep Groove Ball Bearing is made of glass fiber reinforced nylon (suffix TVH).
Deep Groove Ball Bearing Grease
1.Check the chemical stability of nylon to synthetic grease and lubricant containing pressure reducing additives.
2.At high temperatures, aging lubricating oil and additives in the oil can reduce the service life of nylon cages. The replacement cycle of the lubricating oil must be followed.
Bearing Size
(1) Micro bearings - bearings with a nominal outer diameter range of less than 26mm;
(2) Small bearings - bearings with a nominal outer diameter range of 28-55mm;
(3) Small and medium-sized bearings - bearings with a nominal outer diameter size range of 60-115mm;
(4) Medium and large bearings - Bearings with a nominal outer diameter size range of 120-190mm;
(5) Large bearings - bearings with a nominal outer diameter size range of 200-430mm;
(6) Extra large bearings - bearings with a nominal outer diameter range of 440mm or more.
Product Parameters
| Deep Groove Ball Bearing 6000 Series |
| Bearing No. |
Shape Dimensions (mm) |
Basic Load Rating (KN) |
Max Speed (RPM) |
Weight(kg) |
| |
Bore |
Outer |
Width |
Dynamic Cr |
Static Cor |
Grease lubricant |
Oil lubricant |
|
| |
d |
D |
B |
|
|
|
|
|
| 6000 Series |
| 606 |
6 |
17 |
6 |
1.95 |
0.72 |
30000 |
38000 |
0.0057 |
| 607 |
7 |
19 |
6 |
2.88 |
10.80 |
28000 |
36000 |
0.0071 |
| 608 |
8 |
22 |
7 |
3.32 |
1.38 |
26000 |
34000 |
0.011 |
| 609 |
9 |
24 |
7 |
3.35 |
1.40 |
22000 |
30000 |
0.014 |
| 6000 |
10 |
26 |
8 |
4.58 |
1.98 |
20000 |
28000 |
0.018 |
| 6001 |
12 |
28 |
8 |
5.10 |
2.38 |
19000 |
26000 |
0.02 |
| 6002 |
15 |
32 |
9 |
5.58 |
2.85 |
18000 |
24000 |
0.026 |
| 6003 |
17 |
35 |
10 |
6.00 |
3.25 |
17000 |
22000 |
0.036 |
| 6004 |
20 |
42 |
12 |
9.38 |
5.02 |
15000 |
19000 |
0.069 |
| 6005 |
25 |
47 |
12 |
10.10 |
5.85 |
13000 |
17000 |
0.075 |
| 6006 |
30 |
55 |
13 |
10.18 |
6.91 |
10000 |
14000 |
0.116 |
| 6007 |
35 |
62 |
14 |
12.47 |
8.66 |
9000 |
12000 |
0.155 |
| 6008 |
40 |
68 |
15 |
13.10 |
9.45 |
8500 |
11000 |
0.185 |
| 6009 |
45 |
75 |
16 |
16.22 |
11.96 |
8000 |
10000 |
0.231 |
| 6010 |
50 |
80 |
16 |
16.94 |
12.95 |
7000 |
9000 |
0.250 |
| 6011 |
55 |
90 |
18 |
23.28 |
17.86 |
7000 |
8500 |
0.362 |
| 6012 |
60 |
95 |
18 |
24.35 |
19.35 |
6300 |
7500 |
0.385 |
| 6013 |
65 |
100 |
18 |
24.66 |
19.74 |
6000 |
7000 |
0.410 |
| 6014 |
70 |
110 |
20 |
29.68 |
24.20 |
5600 |
6700 |
0.575 |
| 6015 |
75 |
115 |
20 |
30.91 |
26.06 |
5300 |
6300 |
0.603 |
| 6200 Series |
| 623 |
3 |
10 |
4 |
0.5 |
0.2156 |
38000 |
48000 |
0.0015 |
| 624 |
4 |
13 |
5 |
1.15 |
0.40 |
36000 |
45000 |
0.0032 |
| 625 |
5 |
16 |
5 |
1.88 |
0.68 |
32000 |
40000 |
0.0048 |
| 626 |
6 |
19 |
6 |
2.8 |
1.05 |
28000 |
36000 |
0.0075 |
| 627 |
7 |
22 |
7 |
3.28 |
1.35 |
26000 |
34000 |
0.012 |
| 628 |
8 |
24 |
8 |
3.35 |
1.40 |
24000 |
32000 |
0.017 |
| 629 |
9 |
26 |
8 |
4.45 |
1.95 |
22000 |
30000 |
0.019 |
| 6200 |
10 |
30 |
9 |
5.1 |
2.38 |
19000 |
26000 |
0.028 |
| 6201 |
12 |
32 |
10 |
6.82 |
3.05 |
18000 |
24000 |
0.034 |
| 6202 |
15 |
35 |
11 |
7.65 |
3.72 |
17000 |
22000 |
0.043 |
| 6203 |
17 |
40 |
12 |
9.58 |
4.47 |
16000 |
20000 |
0.062 |
| 6204 |
20 |
47 |
14 |
9.88 |
6.20 |
14000 |
18000 |
0.102 |
| 6205 |
25 |
52 |
15 |
10.78 |
6.98 |
12000 |
16000 |
0.120 |
| 6206 |
30 |
62 |
16 |
14.97 |
10.04 |
9500 |
13000 |
0.190 |
| 6207 |
35 |
72 |
17 |
19.75 |
13.67 |
8500 |
11000 |
0.270 |
| 6208 |
40 |
80 |
18 |
22.71 |
15.94 |
8000 |
10000 |
0.370 |
| 6209 |
45 |
85 |
19 |
24.36 |
17.71 |
7000 |
9000 |
0.380 |
| 6300 Series |
| 634 |
4 |
16 |
5 |
1.447 |
0.745 |
32000 |
40000 |
0.0049 |
| 635 |
5 |
19 |
6 |
2.161 |
1.163 |
28000 |
36000 |
0.0073 |
| 6300 |
10 |
35 |
11 |
5.88 |
3.47 |
20000 |
26000 |
0.054 |
| 6301 |
12 |
37 |
12 |
7.48 |
4.65 |
17000 |
22000 |
0.058 |
| 6302 |
15 |
42 |
13 |
8.80 |
5.43 |
16000 |
20000 |
0.082 |
| 6303 |
17 |
47 |
14 |
10.45 |
6.56 |
15000 |
19000 |
0.110 |
| 6304 |
20 |
52 |
15 |
12.26 |
7.81 |
13000 |
17000 |
0.140 |
| 6305 |
25 |
62 |
17 |
17.22 |
11.39 |
10000 |
14000 |
0.220 |
| 6306 |
30 |
72 |
19 |
20.77 |
14.17 |
9000 |
12000 |
0.330 |
| 6307 |
35 |
80 |
21 |
25.66 |
17.92 |
8000 |
10000 |
0.410 |
| 6308 |
40 |
90 |
23 |
31.35 |
22.38 |
7000 |
9000 |
0.600 |
| 6309 |
45 |
100 |
25 |
40.66 |
30.00 |
6300 |
7500 |
0.770 |
| 6310 |
50 |
110 |
27 |
47.58 |
35.71 |
6000 |
7000 |
1.030 |
| 6311 |
55 |
120 |
29 |
55.05 |
41.91 |
5600 |
6700 |
1.367 |
| 6312 |
60 |
130 |
31 |
62.88 |
48.60 |
5000 |
6000 |
1.710 |
| 6313 |
65 |
140 |
33 |
72.21 |
56.68 |
4500 |
5300 |
2.100 |
| 6314 |
70 |
150 |
35 |
80.10 |
63.48 |
4300 |
5000 |
2.550 |
Our Advantages
The company has complete detection means, measure and improve the means of detection means,online detection and performance of finished bearings. Have life test machine, grease leakage temperature rise test, cleanliness measuring device, roundness instrument, curvature tester, roughness tester, liquid gap tester, vibration instrument and various bearing special inspection instrument the key of high precision instruments such as Taylor instrument, roundness instrument etc. are from Britain, Japan and other countries to introduce merit, not only the formation of the strict product quality inspection system, and fully capable of independent research and Analysis on the bearing performance indexes.
FAQ
1.Is the company a production factory or a trading company?
Shandong Dente International Trade Co.,Ltd is a manufacturing enterprise focusing on bearings and integrating research, production and sales.
2.How many the MOQ of your company?
Depending on the size of the bearing, the MOQ is variable, if you are interested, you can contact me for a quote.
3.Does the company accept OEM or customized bearings?
In addition to standard products, we also supply non-standard and modified standard products for special application. Meanwhile, we provide OEM service.
){kind=link}